CH-SX30 Multipurpose Angle Core Drilling Rig
One frame for vertical, inclined and horizontal holes. Steeper than 75° the petrol engine drives it; flatter than 75° it switches to the electric motor, and a separate 50 kg hydraulic module adds powered hold-back and pull.
Model Overview
One frame for vertical, inclined and horizontal holes. Steeper than 75° the petrol engine drives it; flatter than 75° it switches to the electric motor, and a separate 50 kg hydraulic module adds powered hold-back and pull.
Technical Specifications
| Drilling depth | 50 m at 46 mm · 20 m at 110 mm |
| Hole diameter | 46 – 110 mm (1.81 – 4.33 in) |
| Drill pipe | 42 / 30 mm |
| Drilling angle | 0 – 90°; horizontal and flatter than 75° needs the electric motor |
| Power | 7.2 kW petrol (hand start) + 7.5 kW electric, 3,600 / 2,800 rpm |
| Rotation speed | 353 / 740 rpm at max power · 255 / 535 rpm at max torque |
| Max torque | 180 N·m (low gear) |
| Hydraulic module | 50 kg with its own power unit |
| Overall size | 2,200 × 1,000 × 2,500 mm |
| Weight | 180 kg rig + 50 kg hydraulic module |
Key Features
- 0 – 90°: vertical holes, angle holes into a hillside, horizontal holes from a portal or a cut face.
- Petrol, diesel or electric drive; flatter than 75° from horizontal the electric motor takes over.
- Separate 50 kg hydraulic module gives powered hold-back and pull, so nobody winches by hand.
- 180 N·m low gear with 42 / 30 mm rods for 50 m of 46 mm hole.
- 2,200 × 1,000 mm skid with levelling pads; the mast locks at the angle you set.
- Hand-start petrol engine plus 7.5 kW electric motor — one rig covers sites with and without power.
Typical Applications
CH-SX30 specifications, answered
How deep can the CH-SX30 drill?
50 m at 46 mm · 20 m at 110 mm. Depth capacity falls as the rod size grows, so plan against the figure for the tooling you intend to run.
What hole and rod sizes does the CH-SX30 take?
46 – 110 mm (1.81 – 4.33 in).
What powers the CH-SX30?
7.2 kW petrol (hand start) + 7.5 kW electric, 3,600 / 2,800 rpm.
How large is the CH-SX30 and what does it weigh?
Overall size 2,200 × 1,000 × 2,500 mm; weight 180 kg rig + 50 kg hydraulic module.
Request a Quotation
Send your hole depth, core size and ground condition — we reply with a matched configuration, tooling list and lead time.
