Portable Core Drilling Rigs (10 – 300 m)
Portable core drilling rigs from 90 kg hand-carried sampling units to 300 m skid rigs, plus the crawler machines that carry them. Shallow holes, site investigation, water wells and grouting.
Drilling depth
10 - 300 m
Hole diameter
46.5 - 300 mm
Models
25
Models in This Range
Portable core drilling rigs from 90 kg hand-carried sampling units to 300 m skid rigs, plus the crawler machines that carry them. Shallow holes, site investigation, water wells and grouting.
PT-30
A 90 kg petrol-powered sampling rig on a light frame: two speeds, 32 mm rods, holes from 46.5 to 110 mm to 30 m. Carried by two pe
XY-50
Hydraulic-feed spindle rig for 50 m holes at 180 kg bare weight: three spindle speeds from 70 to 650 rpm and a 1,000 mm spindle st
XY-50Y
XY-50 with a base that slides fore and aft on the frame: hole-to-hole moves without lifting the rig off its feet. Same 50 m / 70 –
XY-50J
Base-sliding XY-50 variant on a taller frame for 3 m rod stands: 50 m depth, 280 kg, three speeds plus reverse.
XY-60
Strippable 60 m spindle rig with a matched tripod tower: three speeds 156 – 625 rpm and holes from 60 to 250 mm for core, water we
XY-50S
Low-profile 70 m spindle rig, 350 kg with its diesel on board: three speeds from 195 to 630 rpm for core and open-hole work on tig
XY-1-4
Compact 100 m spindle rig at 500 kg, built to break down for road, rail, bridge and dam investigation: 0 – 360° angle range on 42/
XY-1(YJ)-160
XY-1-4 converted with a base-mounted BW-160 mud pump and a chassis that slides fore and aft: a self-contained 100 m flushing packa
XY-1A
The classic 150 m spindle rig: 430 kg bare, five speeds, 0 – 360° angle. Breaks down into pieces two men can carry — the workhorse
XY-1A-4
Five-speed 150 m spindle rig at 500 kg: 1,010 rpm top speed for small-diameter coring, 0 – 360° angle range, Changchai 1105 diesel
XY(YJ)-1A-160
XY-1A with a base-mounted BW-160 pump and sliding chassis: the standard 150 m investigation rig where the pump has to travel with
GR-150
Compact grouting rig with a sliding base for tunnel, culvert and micro-pile holes to 150 m: five speeds, 0 – 360° angle, 700 kg ex
GK-180-4
180 m spindle rig with a sliding chassis for grouting and investigation holes: four speeds 71 – 790 rpm, 0 – 360° angle, 600 kg ex
GK(YJ)-180-160
GK-180 with a BW-160 pump on the sliding chassis: a 180 m grouting and coring package at 800 kg excluding the power unit.
XY-200-4
200 m of depth in a 600 kg package: four spindle speeds, 0 – 360° angle, 42/50 mm pipe. The most-used rig for geological survey, w
XY-1B-4
200 m spindle rig with four low speeds (71 – 620 rpm) geared for deep small-diameter cores: 15 kN feed, 25 kN spindle lift, 600 kg
XY(YJ)-1B-160
The 200 m XY-1B with a BW-160 pump on a sliding chassis: a complete 200 m flushing package on one skid, 800 kg excluding the power
XY(YJ)-200-4
XY-200-4 with a sliding chassis and base-mounted BW-160 pump: 200 m of depth in a 700 kg package that walks itself hole to hole.
GR-200
Vertical-spindle grouting rig with a sliding base: 200 m depth, 73-300 mm holes, 0-360° angle. For tunnel and culvert grouting, mi
GK-200
200 m four-speed spindle rig (115 – 1,010 rpm) on a wide skid: an 800 kg class machine for survey, grouting and small water-well h
XY-2PC
Vertical spindle rig with a skid base that slides fore and aft: 150 – 300 m, two-speed bevel gear change, 46 × 51 mm hexagonal thr
Towers
Tripod and four-leg steel towers from 6 to 13 m for portable spindle rigs and shallow water-well work — the lifting frame for hois
LDJ-1Y
Compact crawler mounting machine for light drilling sets: 550 kg all-in with its R180 diesel on board, sized for tight sites and s
LDJ-2G
Purpose-built crawler machine for XY-1A, XY-1B, GK-180 and GXY-260 rigs: 4.5 t deck load, 6.5 m tower height above the platform an
LDJ-4B
Heavy crawler mounting machine: 5 t deck load and 7.6 m tower height for the larger XY and GK rigs, with hydraulic legs and cylind
Not Sure Which Model Fits?
Send the depth and ground condition — we will shortlist within the range.